HydroForce® MiLL HYDRAULIC SYSTEMS

_

Controlled Hydraulic Pressure For Sugar Cane Mills

_

The Edwards mill hydraulic system and accumulators are based on more than 50 years of experience in the sugar cane industry. Their primary purpose on mill cap rams is to establish a desired average opening to the mill, subject the cane and bagasse to pressure, and increase the mill opening under a yielding force, when necessary.

Features and Benefits
All components are integrated into a reliable system with the power unit design
Mill roll performance can be adjusted with adjustable mill cap ram pressure
Lift adjustment and synchronization of the mill top rolls
Cane feeding is controlled through the first grinding mill
Hydraulic system verification is possible at all times
Operating pressure in all mill caps can be easily observed
Hydraulic pressure may be applied to the cap rams at the same pressure of the off side or may be independently applied to offset upward force produced by the drive mechanism on the crown side.

Accumulators

_
More than 10,000 Edwards accumulators in worldwide sugar mill use today. They are modern, simple, compact and efficient. Utilize pure nitrogen and hydraulic oil. Have virtually no moving parts or pistons, so maintenance is infrequent.

Top Roll Movement Indicator

_
Provides instantaneous and visual readings of the top roller position and movement in 1/8 inch increments. Easily installed and rugged for extended use.

Hydraulic Pump

_
Electric push button hydraulic pump includes self-contained oil reservoir, breather, oil filters, check and relief valves. High volumetric capacity and can start under full hydraulic back pressure without stalling.

Control Panel (shown) or 4-Valve Manifold

_
Electric push button hydraulic pump includes self-contained oil reservoir, breather, oil filters, check and relief valves. High volumetric capacity and can start under full hydraulic back pressure without stalling.